EasyManua.ls Logo

Water Ace R15L - User Manual

Default Icon
29 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CONSUMER HOT-LINE: 1-800-942-3343
Monday–Friday 7 AM to 5 PM EST
www.waterace.com
INSTALLATION MANUAL Pgs. 1–8
LAWN SPRINKLER PUMPS
POMPES POUR ARROSEURS DE PELOUSES
MANUEL D’INSTALLATION Pgs. 9–18
MANUAL DE INSTALACIÓN Pgs. 19–28
BOMBA DE ROCIADOR DE CÉSPED
WATER ACE PUMP COMPANY
|
1101 MYERS PARKWAY
|
ASHLAND, OHIO 44805-1969 (USA ONLY)
23833A308 (Rev. 11/7/05)
BAG #23834A002
R15L
1-1/2 HP
R10L
1 HP
R7L
3/4 HP
R25L
2-1/2 HP
R20L
2 HP

Table of Contents

Questions and Answers

  • C
    Christopher NashAug 10, 2025
    Why is my Water Ace R15L Water Pump not delivering rated capacity?
    • E
      Erika LucasAug 10, 2025
      If your Water Ace Water Pump isn't delivering its rated capacity, several factors could be at play. Start by checking that the suction pipe is submerged at least 3 feet below the water level and ensure the voltage of the pump matches the voltage of the power supply. Also, inspect the valve, suction piping, foot valve, or well point. Reduce the discharge system head, check for any leaks, and if the pump flow exceeds the well's capability, reduce the pump flow. Confirm all connections are airtight and that the suction pipe is 1-1/2".
  • E
    Ernest Bates DDSAug 17, 2025
    What to do if Water Ace Water Pump motor overheats?
    • U
      urodriguezAug 17, 2025
      If your Water Ace Water Pump motor overheats and shuts off, make sure the motor voltage matches the power supply voltage. You may also want to check if the impeller is rubbing against the pump case. Refer to the Wire Size Guide on page 3.
  • R
    Ryan LeachAug 25, 2025
    Why does my Water Ace R15L lose prime after starting?
    • A
      Alex ElliottAug 25, 2025
      If your Water Ace Water Pump loses prime after starting, first make sure the suction pipe is at least 3 feet below the water level. Check for any leaks and ensure that the pump flow does not exceed the well's flow capability. Also, check that all connections are airtight.
  • J
    johnmurphySep 2, 2025
    Why is my Water Ace Water Pump so noisy?
    • C
      clarkjessicaSep 2, 2025
      If your Water Ace Water Pump vibrates or is noisy, ensure that the pump foundation is sufficient. Also, check for a bent shaft, worn motor bearing, or a clogged impeller. Note that the well depth should not exceed the pump's capability.

Summary

Important Instructions Before Installation

Finding the Depth of Your Well

Guidance on measuring well depth for proper pump operation.

Piping Requirements

Details on clean, airtight piping for pump installation.

Specifications

Fuse;Breaker & Wire Selection Guide

Guide for selecting appropriate fuses, breakers, and wire sizes.

Pump Capacities

Table detailing pump performance at various discharge pressures.

Lawn Sprinkler Pump Installation

General Materials

List of common materials required for pump installation.

Well Pump Specific Materials

Additional materials needed for well pump installations.

Tools for Pump Installation

Essential tools required for all pump installations.

Well Point Pump Installation

Well Point Specific Materials

Additional materials for well point installations.

Multiple Well Points

Guidance on connecting multiple well points for increased flow.

Draining and Servicing for Winter

Procedure for draining pump for winterization or servicing.

Troubleshooting Checklist

Pump Disassembly

Instructions for taking apart the pump for repair or inspection.

Repair Kits

Information on available repair kits for pump components.

Limited Warranty

Warranty Exclusions

Specific conditions not covered by the pump warranty.

Liability Limitation

Details on consequential or incidental damages not covered.

Product Improvements

Company's right to improve products without prior notification.

Water Ace R15L Specifications

General IconGeneral
BrandWater Ace
ModelR15L
CategoryWater Pump
LanguageEnglish

Related product manuals