To Next PageTo Next Page
Need help?Do you have a question about the Water Ace RPT86 and is the answer not in the manual?
Warns against exceeding 100 PSI to prevent serious injury or equipment damage.
Advises against freezing the tank to prevent damage and voiding the warranty.
Specifies correct pre-charge pressure based on pump pressure switch settings.
Explains how the pre-charged tank functions during the water system cycle.
Guidance on replacing a standard tank with a pre-charged tank, including sizing.
General| Model | RPT86 |
|---|---|
| Category | Water Pump |
| Horsepower | 0.5 HP |
| Voltage | 115 V |
| Cord Length | 10 ft |
| Power Cord Length | 10 ft |
| Type | Sump Pump |
| Phase | 1 |
| Switch Type | Automatic |
