To Next PageTo Next Page
Need help?Do you have a question about the Water Ace RPT20 and is the answer not in the manual?
Consolidates all safety alert symbols, signal words, and critical warnings for safe operation.
Details the terms, conditions, exclusions, and limitations of the product warranty.
Explains how to set the initial air pressure in the tank based on pump switch settings using Chart 1.
Describes the step-by-step process of how the pre-charged tank functions with the pump, referencing Figure 2.
Guides on replacing traditional tanks with pre-charged models and sizing considerations.
Outlines the procedure to check and adjust the tank's air charge using a tire gauge, referencing Chart 1.
Provides instructions for testing the water cell for leaks and replacing it if necessary.
Lists specific repair parts and their corresponding part numbers for RPT7 and RPT7H models.
Lists specific repair parts and their corresponding part numbers for RPT20 through RPT119 models.
General| Horsepower | 1/5 HP |
|---|---|
| Voltage | 115 V |
| Construction | Thermoplastic |
| Model | RPT20 |
| Material | Thermoplastic |
| Phase | Single |
| Maximum Flow Rate | 20 GPM |
| Inlet Size | 1.25 inches |
| Outlet Size | 1 inch |
| Max Flow Rate | 20 GPM |
| Discharge Size | 1 inch |
