EasyManua.ls Logo

Water Tech Pool Blaster CX-1 - Weekly Mode Running Schedule; Select Cleaning Mode

Water Tech Pool Blaster CX-1
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Floor Only Mode
8
b. Select Cleaning Mode
• Cleaning Modes: The CX-1 is equipped with tilt sensors to help achieve the customers
desired cleaning mode.
Floor & Walls – The CX-1 will clean the
oors and climb the walls, enabling the
CX-1 to scrub the waterline.
Floor & Walls Mode
Floor Only – The CX-1 will stay on the
oor, picking up debris and scrubbing
scum. It will partially climb the walls
enough for it to clean the hard to reach
edges along the bottom of some pools.
Weekly cycle runs your robot every day for a full week. Starting from when you rst turn it
on, the robot will clean approximately 60 minutes. Then at the same time every day for the
remainder of the week, the robot will run for approximately 30 minutes.
Weekly Cycle Running Schedule

Related product manuals