INSTALLATION
1. Position the lter as close to the Swimming Pool / Spa as possible.
2. Position the lter so that it is free from ooding, away from sumps, guttering, garden hollows, etc.
3. Position the lter so that the piping connections, Multiport Valve and winter drain is convenient and
accessible for operation, servicing and winterising.
4. Ensure that the compliance label is facing the front to allow easy identication.
5. The lter should be placed on a level concrete slab, very rm ground, or equivalent. Ensure that the
ground will not subside, preventing any strain from the attached plumbing.
6. Ensure that there is no movement of the lter during operation of the Multiport Valve.
7. Allow sufcient clearance around the lter to permit visual inspection of the entire system.
Filtration
Waterco breglass lters operate on the basis of “depth ltration”; dirt is driven through the lter bed
and trapped in minute spaces between the particles of lter media allowing ltered water to pass
through the lter’s laterals and exit via the lter’s Multiport valve.
VALVE
MULTIPORT VALVE
Waterco Sidemount fibreglass filters Waterco Top Mount fibreglass filters
To Next Page
Loading...
