Waterco ELECTROCHLOR - User Manual

WARNING
!
www.waterco.com.au
Owner's Manual
ELECTROCHLOR
®
Mineral Chlorinator
This equipment must be installed and serviced by a qualified technician.
Improper installation can create electrical hazards which could result in
property damage, serious injury or death. Improper installation will void the
warranty.
Notice to Installer
This manual contains important information about the installation, operation
and safe use of this product. Once the product has been installed this manual
must be given to the owner/operator of this equipment.

Summary

GENERAL SAFETY RULES

INSTALLATION

Installing the Power Pack

Installing the Electrolytic Cell

PROGRAMING THE ELECTROCHLOR

Using the Control Wheel

Explains the function of the rotary index switch for menu navigation and selection.

Understanding the LCD Screen

Details the information displayed on the main screen of the Electrochlor unit.

Operating Modes and Functions

Covers switching pump on/off, Auto, Manual, Winter, Spa, Service, and Superchlorination modes.

Timer and Clock Programming

Guide to setting the digital clock and programming the 4 independent timers.

Chlorine Output and Pump Speed Control

Adjusting chlorine production and managing variable pump speed settings.

Settings and Diagnostics

Covers valve control, pump type, auxiliary outputs, temperature calibration, and diagnostics.

Interlock and Low Flow Management

Explains interlock functions, pump speed dependencies, and low flow condition handling.

MAINTENANCE

Salt Cell Cleaning Procedure

ALARMS

Low Salt Level Alarm

High Salt Level Alarm

Failed Pump Start Alarm

RECOMMENDED WATER CHEMISTRY

TROUBLESHOOTING GUIDE

TECHNICAL SPECIFICATIONS

Waterco ELECTROCHLOR Specifications

General

Brand	Waterco
Model	ELECTROCHLOR
Category	Water Filtration Systems
Language	English