24
I
Electrochlor Mineral Chlorinator
f. Setting the Chlorine Output
The output of the chlorinator can be adjusted to reflect the different seasonal
requirements in order to maintain satisfactory chlorine sanitiser levels.
The amount of chlorine produced can be adjusted from 10% - 100% (10%
increments) by accessing the CHLORINE production level menu.
Rotate the wheel to the right to raise production. If the pool water is over
chlorinated, simply reduce the chlorine production set level by rotating the
wheel to the left. Press the wheel confirm the desire chlorine output.
• To exit without saving select X and press the wheel.
To Next Page
Loading...
