38
I
Electrochlor Mineral Chlorinator
7. RECOMMENDED WATER CHEMISTRY
Salt Level
The Electrochlor chlorinators must operate between the salt level ranges listed
below.
• MINIMUM = 4000 TDS
• OPTIMUM = 5500 TDS
• MAXIMUM = 6000 TDS
Testing kits are available from the local pool professional and should be used to
accurately check the salt level in the pool water.
Water Balance
It is important to maintain the correct water chemical balance in the swimming
pool; this will help protect the Electrochlor chlorinator and its cell.
Consult the local pool professional for the correct water balance according to the
swimming pool type.
The Electrochlor chlorinator will run correctly at the following chemistry levels
Parameter Range Recommended
pH 7.2 – 7.8 7.2 – 7.6
Total alkalinity 60 – 200ppm 80 – 150ppm
Calcium hardness 100 – 500ppm 60 – 250ppm
Stabilizer (Sunscreen) 30 – 60ppm
It is recommended that you obtain regular water chemistry tests from
your local pool professional to ensure your water balance is within
range.
NOTE:
To Next Page
Loading...
