Waterco ELECTROCHLOR - ALARMS; Low Salt Level Alarm; High Salt Level Alarm; Failed Pump Start Alarm

I 37
Electrochlor Mineral Chlorinator
6. ALARMS
Electrochlor includes alarm signals to indicate potential problems associated with
its functionality, and to protect the Power Pack/electrolytic cell. The LCD will flash,
the Power Pack emit a sound and indicate the correspondent situation.
• Low Salt Level
Salt level is below the minimum allowed, please add salt to pool. Consult your
pool professional for advice how to increase the salt level. This condition may
affect the longevity of the cell and void its warranty.
• High Salt Level:
Salt level is above the maximum operational level. It needs to be reduced
below the maximum recommended. Consult your pool professional for advice
how to reduce the salt level. This condition may affect the longevity of the cell
and void its warranty.
• Failed Pump Start (No flow detected):
If the flow sensor is not detecting water flowing through the cell housing, Power
Pack will stop chlorine production and power to pool pump. Electrochlor will
repeat the start-up process twice before issuing a No Flow alarm. Please refer
to trouble shooting guide or consult your pool professional.