Waterdrop WD-AS08 User Manual

Quick Connect Under Sink Stainless-steel Water Filtration System
Instruction Manual
Operating temperature
Working pressure
Flow rate
Feed water requirement
Filter capacity
41-100℉/5-38℃
15-100 psi/100-689 kpa
1.6 gpm/6.0 lpm (tested under 60psi)
Municipal tap water
WD-AS08: Up to 1 year/8000 gallons
WD-AMS08: Up to 1 year/8000 gallons
Specifications
Precautions
• Please wear a pair of gloves when installing to avoid scratching your hand.
• Do not use it with water that is microbiologically unsafe or of unknown quality without
adequate disinfection.
• For use only with cold water.
• Do not freeze the lter, as this can cause cracking and water leakage.
• Do not allow children under 3 years old to have access to small parts during installation of this
product.
• This installation must comply with all applicable state and local regulations.
• Turn o the water supply while replacing the lter.
29.5 inches
3/8‘’ inlet hose
Cartridge
Filter head
3/8“-1/2” Converter
Fastening
ring
Bracket
29.5 inches
3/8‘’ outlet hose
Wrench
Teon tape
Filter housing
Model No.: WD-AS08/WD-AMS08
(Note: Actual life varies according to local water quality.)

Waterdrop WD-AS08 Specifications

General

Brand	Waterdrop
Model	WD-AS08
Category	Water Filtration Systems
Language	English

Summary

System Overview and Specifications

System Specifications

Details on operating temperature, pressure, flow rate, feed water, and filter capacity.

Important Precautions

Safety guidelines for installation and use, including water quality and freezing prevention.

Filter System Installation Guide

Mounting the Bracket

Instructions for attaching the mounting bracket to the filter head and selecting installation position.

Connecting Water Supply

Steps for shutting off water, removing hoses, and connecting the inlet hose to the cold water valve.

Connecting to Faucet

Guide for connecting the outlet hose to the faucet, including adapter usage for different faucet fittings.

Post-Installation and Maintenance

Connecting Filter Tubing

Instructions for installing the inlet and outlet water tubing to the filter system.

Leak Check and Flushing

Procedure to check for leaks and flush the filter system before use.

Cartridge Change Procedure

Steps for removing the old cartridge and installing a new one.

Frequently Asked Questions and Support

Addressing Water Quality and Filter Function

Explains TDS, filter reduction capabilities, and replacement indicators.

Product Differences and Assurance

Details on model variations (WD-AS08 vs WD-AMS08) and 5-year quality assurance terms.

Technical Support Contact

Provides contact information for customer support and troubleshooting assistance.