To Next PageTo Next Page
Need help?Do you have a question about the Watson Marlow Pumps 630 and is the answer not in the manual?
General| IP rating | IP66 |
|---|---|
| Operating temperature | 5°C to 40°C |
| Supply voltage | 100-240V, 50/60Hz |
| Maximum Pressure | 2 bar |
| Hose Inner Diameter | 0.5 mm to 9.6 mm |
| Material | Stainless Steel |
Document stating the pump's compliance with EU directives and harmonised standards.
Declares the pump as partly completed machinery under Machinery Directive 2006/42/EC.
Instructions on carefully unpacking pump components and retaining packaging.
Guidance on safe and compliant disposal of packaging materials.
Instructions to check components for presence and damage during transit.
List of items included with the 630 pump drive unit and module.
Recommendations for storing the product to maintain function.
Table detailing the weights of the pump and its variants in kg and lb.
Visual guide to the available pumphead options for the 630 pump range.
Recommendations for pump siting, airflow, temperature, and emergency stops.
Guidelines on correct and incorrect practices for pump installation and tubing.
Explanation of the keypad layout, symbols, and function of each key.
Instructions on how to start and stop the pump using the keypad.
How to use the arrow keys to change values and navigate menus.
How to set the pump to its maximum speed.
Instructions on how to change the pump's rotor rotation direction.
Table showing conductor colour coding for Line, Neutral, and Ground.
Guide to wiring the NEMA module for PROFINET® communication.
Identification and description of connectors and features on the pump's rear panel.
Details on connecting network cables via RJ45 ports, including LED indicators.
Wiring information for the 9-way D sensor connector for control signals.
Guide to selecting the desired language using the pump's interface.
Overview of the default operational parameters set on first startup.
How to access and configure security features like keypad lock and PIN protection.
Accessing and modifying general pump settings like Auto Restart and Flow units.
Navigating to change the pump's operating mode.
Adjusting pump parameters like speed limit, run hours, and inputs.
Setting up external inputs for controlling the pump, like stop/start.
Accessing help information and software versions from the main menu.
How to start the pump in Manual mode and observe display changes.
How to stop the pump in Manual mode and observe display changes.
Using keypad keys to adjust the pump's flow rate up or down.
Step-by-step guide to calibrating the pump's flow rate accurately.
How the pump behaves on startup and during PROFINET® connection issues.
Settings for DHCP, IP Address, Subnet mask, and Gateway address.
How to select and use the PROFINET® operating mode.
Grouping of pump parameters into modules for easy access and management.
Procedure for creating or modifying dispensing recipes with specific parameters.
Steps to create or edit batches, defining size, recipe, and delays.
How to select the desired batch to be dispensed.
Instructions on starting the dispensing process and understanding the dispense screen.
Detailed configuration of dispense settings including batch name, size, and recipes.
Diagrams showing the correct wiring for connecting sensors to the pump.
Guide to configuring attached sensors, including flow and pressure types.
Setting a delay for motor start before alarms or warnings activate.
List of error codes, their conditions, and suggested actions for resolution.
Contact information for obtaining technical support and assistance.
Detailed steps for removing and refitting the 620R and 620RE pumpheads.
Instructions for replacing continuous tubing on 620R and 620L pumpheads.
Steps for replacing different types of tube elements for various pumphead models.
Guide to constructing pump part numbers based on model, ingress protection, and plug options.
Tables listing part numbers for continuous tubing and LoadSure tube elements.
Procedures for Clean-in-Place (CIP) and Steam-in-Place (SIP) for pumpheads.
Flow rate data for 620RE, 620RE4, and 620R pumpheads under various conditions.
An index of all tables included in the manual with their corresponding page numbers.
An index of all figures included in the manual with their corresponding page numbers.
