Watson-Marlow 505L - Page 2

11.2 Wiring the US NEMA module 19
11.3 Earth screening of control cables on NEMAmodule 19
12 Start-up check list 20
13 Control wiring 21
13.1 Upper D-connector 21
13.2 PROFIBUS 21
14 Switching the pump on for the first time 31
14.1 Selecting the display language 31
14.2 First-time start-up defaults 33
15 Switching the pump on in subsequent power cycles 35
16 Mode menu 36
17 Manual 37
17.1 START 37
17.2 STOP 38
17.3 INCREASING AND DECREASING FLOW RATE 38
17.4 MAX FUNCTION (Manual mode only) 39
18 Flow calibration 40
18.1 Setting the flow calibration 40
19 PROFIBUS mode 43
19.1 MODE menu 43
19.2 Manual mode operation when PROFIBUS is enabled 43
19.3 PROFIBUS mode 45
19.4 Assigning the PROFIBUS station address at the pump 47
19.5 PROFIBUS communication errors 48
19.6 PROFIBUS GSD file 50
20 Main menu 53
20.1 Security settings 54
20.2 General settings 63
20.3 Help 75
21 Troubleshooting 76
21.1 Leak detection 77
21.2 Error codes 77
21.3 Technical support 78
2 m-530bpn-en-08.1