Watts Premier CT-1 - Performance Data Sheet; General Use Conditions; Recommended Replacement Parts and Change Interval

Watts Premier, Inc.
8716 W Ludlow Drive Suite #1
Peoria, AZ 85381
Performance Data Sheet for specic claims to NSF Std-53.
CT-1
GENERAL USE CONDITIONS:
1: System to be used with municipal or well water sources treated and tested on regular basis to insure
bacteriological safe quality. DO NOT use with water that is microbiologically unsafe or unknown quality
without adequate disinfection before and after the system. Systems certied for cyst reduction may be used on
disinfected water that may contain lterable cysts.
2: Operating Temperature: Maximum 100
o
F (40.5
o
C) Minimum 40
o
F (4.4
o
C)
3: Operating Water Pressure: Maximum 100-psi (7.43 kg/cm
2
) Minimum 10-psi
4: Turbidity: < 5 NTU
5: pH: 5 to 10
6: Maximum ow Rate: 0.50 gpm (1.89 lpm)
RECOMMENDED REPLACEMENT PARTS AND CHANGE INTERVAL:
Note: Depending on incoming feed water conditions replacement time frame may vary.
Description Units Change time Frame
1 Micron Carbonblock P-CB-1: CT-1 6 Months or 1350 gallons
6