Benchmark Platinum-Edge: Operation-Service Manual
SECTION 2: OPERATION
OMM-0137_D • GF-211 • 7/16/2019 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 14 of 146
2.2 Login and Password Entry
The Edge Controller has multiple levels of password protection.
Level Password Description
1 No password The default. Many parameters are visible but “Read Only.”
2 159
Allows routine maintenance to be performed. Appropriate for AERCO
Trained technicians (ATT).
A higher-level password is reserved AERCO Master Technicians (AMT). It is distributed on an
individual basis.
To enter a password:
1. On the Edge Controller, go to
Main Menu Advanced Setup Access. The Enter
Password screen appears.
2. Use the number keypad to enter the password (each number appears as a X), then press
Save. You will have access to the functionality associated with the level of the password
entered.
Figure 2.2: Enter Password Screen
3. Once you have successfully logged into the system, the Main Menu appears. All Edge
functionality is accessed through one of the six Main Menu items.
Figure 2-3: Edge Controller Main Menu
NOTE:
Full instructions for using the Edge Controller are in the Edge Controller Manual (GF-213).
To Next Page
Loading...
