Watts BT-DRF-02 - Sensor and Cooling Mode Configuration

20
Parameters
Installer’s Advanced Menu
N°
names
Description of the parameter
Factory value
Other possibility
20
REG
Selection of the sensor used for the
regulation.
“AIR”
Internal ambient
sensor
“amb”
External ambient
sensor
The following option
are only available with
receiver
“FLR”
Floor sensor
regulation
“FL.L”
Air regulation with
floor limitation
possibilities
(see parameters
25&26)
21
Cld ---
Use this option if you want to allow the
zone to work in cooling mode
“yes”
Function activated
“no”
Function deactivated