Watts BT-DRF-02 - Setting Range and Window Detection; Reloading Defaults and Exiting Menu

22
29
Bp1
Floor covering choice.
“Bp1”
For tiling
“Bp2”
For wood parquet
(floating or not)
30
Uir
Pilot wire function for French Market
application:
Use this option if your installation has the
pilot wire installed in combination with an
energy saver.
“yes”
Function activated
“no”
Function deactivated
31
min
Minimal value of the setting range.
“5.0°C”
“15.0°C”
32
MAX
Maximal value of the setting range.
“20.0°C”
“37.0°C”
33
Uin
Automatic open window detection.
(See user guide for more explanation)
“yes”
Function activated
“no”
Function deactivated
34
EEp
All parameters will be reloaded with the
factory value.
Press on the (OK) key during few seconds.
35
End
To exit the installer’s menu
Press on the (OK) to exit.