Wavetek 180 - Addenda

1
SECTION
PARTS AND SCHEMATICS
7.1 DRAWINGS
The following assembly drawings (with parts lists! and
schematics are in the arrangement shown below.
7.2 ORDERING PARTS
When ordering spare parts, please specify part number,
circuit reference, board, serial number of unit, and if
applicable, the function performed.
7.3 ADDENDA
Under Wavetek's product improvement program, the latest
electronic designs and circuits are incorporated into each
Wavetek instrument as quickly as development and testing
permit. Because of the time needed to compose and print
instruction manuals, it is not always possible to include the
most recent changes in the initial printing. Whenever this
occurs, addendum pages are prepared to summarize the
changes made and are inserted immediately inside the rear
cover. If no such pages exist, the manual is correct as printed.
Page No.
CHASSIS
Schematic
Assembly Drawing
Model 180 Parts List
Model 180LF Parts List
7-2
7-3
7-4
7-5
MAIN BOARD
Schematic
Assembly Drawing
Model 180 Parts List
Model 180LF Parts List
7-6
7-7
7-8
7-10
7-1