Wavetek 9100 - Resistance

Model 9100 — Operator's Guide: Resistance Function 7-1
User's H'b'k
Page Ref
7
Resistance Calibration
7.1 Interconnections
The general connection scheme for UUT calibration
is illustrated in
Fig. 7.1 . The use of either 4-wire
remote sensing at the UUT terminals, or 2-wire local
sensing at the 9100 terminals, is served by the same
connections from the 9105 at the work mat. Selection
of 2/4-wire is carried out on the 9100 front panel.
Fig. 7.1: Interconnections for
2-Wire or 4-Wire UUT Resistance Calibration
10A mA COM V-
A
A
A
A
Cap
+
-
I+mAI+ 20ALI-
sLsHH
WhiYellBlkBlkRedRed
Adaptor Parking Holes
Work Mat
UUT
A
A
A
Thermo
Couple
+
-
www.valuetronics.com