Wavetek 9100 - Auxiliary Functions

User's H'b'k
Page Ref
Model 9100 — Operator's Guide: Auxiliary Functions 12-1
Auxiliary Calibration
12
12.1 Auxiliary Functions
12.1.1 Function Grouping and Selection
Three function groups are accessed using the 'Aux' key on the
right of the front panel. Two are sub-divided into individual
functions as shown in the table below, which also gives their
selection symbols and Section numbers in this guide:
Function Symbol Sub- Symbol Section
on Aux Function on Sub-
Screen Screen
Capacitance --- --- 13
Temperature: °C Thermo THERMO
-couple COUPLE
TYPE 14
RTD RTD 15
Logic: Pulses 16
Levels 1/Ø 17
12.1.2 Calibration Procedures
The instructions for calibrating UUTs in the above functions are
contained in their sections as shown in the table.
www.valuetronics.com