Waydoo Flyer EVO - Page 18

Waydoo Flyer EVO USER GUIDES
© 2024 All rights reserved by Waydoo
16
2. Notification interface
The notification interface displays the details of notifications, prompts,
exceptions, etc. that the user needs to know or handle. When there is no
such message, this interface will not appear. When such a message exists,
you can switch from other display interfaces to the notification interface by
pressing the power button.
The notification interface will display the current notification, prompt, or
exception messages. If there are multiple messages, you can press the "+"
/"-" buttons to select one of them, and press the trigger to view the details
of the selected item.
Some messages may require user operation, such as confirmation,
cancellation, or no longer display. After opening the message details, you
can select the operation method by using the "+" /"-" buttons, and press the
trigger to confirm the operation.
3. Menu interface
In other interfaces, you can switch to the menu interface by short pressing
the power button of the remote.
1) LED settings
LED Display Mode
LED Color
2) Flight Setting
Master Plus/Pro Plus/Max Plus equipped with flight assist function. Before
using the flight assist function, please check the sensor under the front of
the board to ensure that there is no foreign object attached to the sensor.
Setting operation steps:
1. When the trigger is locked, press the power button to switch to the
menu interface.
2. Press the trigger once to enter the menu setting.
3. Press the "+" /"-" buttons as a navigation buttons to Flight Setting.
4. Flight assist is turned off by default and is in manual mode by default.
First switch to flight assist to turn on the flight assist function.
5. Then navigate to flight altitude. After entering, you can switch between
three flight altitudes: high, medium and low.
6. After setting, when using, the sensor will automatically stabilize the flight