Wayne-Dalton 105 User Manual

This Installation document is available at no charge from:
- Your local Wayne Dalton Sales Center, or
- Online at www.Wayne-Dalton.com, or
- By mailing to: Wayne Dalton, a division of Overhead Door Corporation, P.O. Box
67, Mt. Hope, OH., 44660
©Copyright 2018
REV7_06/20/2018Part Number
Table Of Contents
347750
PLEASE DO NOT RETURN THIS PRODUCT
TO THE STORE
If you need assistance, please call 1-866-
569-3799 (press Option 1) and follow the
prompts to contact a customer service
representative. They will be happy to handle
any questions that you may have.
Pre-Installation 2
Important Safety Instructions 2
Removing an Existing Door and Preparing the Opening 2
Package Contents 3
Door Section Identification 4
Tools Required 4
Breakdown Of Parts 5
Door Installation Instructions 6
Counterbalance Installation Instructions 13
Optional Installation 20
Door Arm Hookup 20
Lift Handles 20
Pull Down Rope 20
Maintenance 21
Cleaning Your Garage Door 21
Painting Your Garage Door 21
Maintaining The Finish On Your Garage Door 21
Operation And Maintenance 21
Warranty 23
Wayne Dalton, a division of Overhead Door Corporation
Models 105, 110,
106, 116, 310, 311,
314 and 316
T o r s i o n
insTallaTion insTrucTions and owner’s
Manual
residenTial and lighT coMMercial
sTandard lifT
DEFINITION OF LIGHT COMMERCIAL:
1. Door Heights less than or equal to 8’0” (< = 8’0”) are considered
Residential Applications.
2. Door Heights greater than 8’0” (> 8’0”) are considered Light
Commercial Applications.
To avoid possible injury, read and fully understand the enclosed
instructions carefully before installing and operating the garage door. Pay
close attention to all warnings and notes. After installation is complete,
fasten this manual near garage door for easy reference.
IMPORTANT NOTICES!

Wayne-Dalton 105 Specifications

General

Drive Type	Chain Drive
Horsepower	1/2 HP
Remote Control	Yes
Battery Backup	No
Max Door Height	7 feet
Voltage	120V
Maximum Door Height	7 feet
Warranty	1 Year Limited

Summary

Pre-Installation and Preparation

Important Safety Instructions

Key safety guidelines and warnings to prevent injury during installation.

Preparing the Opening

Removing existing doors, headroom, backroom, and opening preparation.

Tools and Parts Identification

Lists required tools, identifies door sections, and details all parts.

Breakdown of Parts

Detailed illustration and list of all garage door components and their labels.

Door Installation - Initial Steps

Attaching Vertical Tracks and Bottom Hardware

Steps for attaching vertical tracks, jamb brackets, and bottom section hardware.

Hinges, Struts, and Rollers

Attaching hinges, struts, and rollers to bottom and intermediate sections.

Intermediate Section Hardware

Instructions for attaching hinges and struts to intermediate door sections.

Door Installation - Final Assembly

Top Section Hardware and Fixtures

Installation of top fixtures, struts, and adjustments.

Stacking Door Sections

Guidance on lifting and assembling door sections onto vertical tracks.

Horizontal Tracks and Adjustments

Installation of horizontal tracks and adjustment of top fixtures.

Counterbalance and Spring System Installation

Center Bracket and Torsion Spring Assembly

Detailed steps for mounting center brackets and assembling torsion springs.

Lift Cables and Spring Winding

Attaching counterbalance lift cables and safely winding torsion springs.

Rear Back Hangs and Securing

Installing rear back hangs and securing the door for adjustments.

Operation, Maintenance, and Warranty

Final Adjustments and Seals

Balancing the door, attaching weather seals, and label placement.

Optional Installation Features

Instructions for installing optional features like lift handles and pull down ropes.

Maintenance and Operation Guidance

Covers cleaning, painting, manual/electric operation, and routine checks.

Warranty Information

Details the limited warranty terms, conditions, and exclusions.