SPECIFICATIONS
POWER SUPPLY REQUIREMENTS 120 or 230 V, 60 Hz
MOTOR Single Phase AC Induction
HORSEPOWER
1/2 HP...................(SWS50)
CUT IN PRESSURE
30 PSI
CUT OUT PRESSURE
50 PSI
670005W-001 F 07/20© 2020, WAYNE/Scott Fetzer Company.
CONSTRUCTION
MOTOR HOUSE Carbon Steel
SEAL PLATE Cast Iron
DIFFUSER Thermoplastic
IMPELLER Thermoplastic
SHAFT Stainless Steel
PUMP SUCTION 1-1/4 in. NPT
PUMP DISCHARGE 1 in. NPT
Shallow Well Jet Pump System
+ Pre-Charged Tank
www.waynepumps.com
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual SWS50-8.5FX
Intended for Indoor Use Only
PERFORMANCE GAL/HR
Model PSI
Well Depth
0 ft 5 ft 10 ft 15 ft 20 ft 25 ft
SWS50
30 711 674 638 601 565 529
40 543 506 470 433 397 361
50 375 338 302 265 229 193
To Next Page
Need help?
General
