4
QUICK START INSTRUCTIONS
WWB GLOW
For product & service information
visit www.waynepumps.com
READ THIS MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS
IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. KEEP THIS MANUAL FOR FUTURE REFERENCE.
© , WAYNE/Scott Fetzer Company.
STEP 3 - REMOVE DISCHARGE CAP
STEP 4 - ATTACH GARDEN HOSE TO BRASS DISCHARGE
STEP 5 - PLACE IN WATER
STEP 6 - ALWAYS PLUG INTO GFCI OUTLET. PUMP WILL
TURN ON ONCE PLUGGED IN AND START TO MOVE WATER
STEP 1 - GET TO KNOW YOUR PUMP
STEP 2 - CHOOSE THE DISCHARGE BEST FOR THE
APPLICATION
• TOP DISCHARGE
is perfect for water
removal in tight spaces: Laundry Tubs,
Window Wells, Buckets, etc.
• SIDE DISCHARGE is ideal for easy
Flat Roofs, Flooded Basements, standing
water in yard, crawl spaces, etc.
Removes water down to
1/16 in. of surface,
VIRTUALLY DRY!
TWIST
TIP: Unwind and remove all kinks
pumping and priming.
Requires 3/16 in. of water
to start pumping.
NOTE: Check/tighten unused discharge
cap
2020
-OR- -OR-
®
WITH MOTOR SHUT-OFF PROTECTION
GLOW
PLEASE SEE THE NEXT PAGE FOR STEPS 7-9
• ON/OFF INDICATOR
• 10 FT. POWER CORD
CARRYING HANDLE
•
TOP DISCHARGE
•
• SIDE DISCHARGE
• CORD WRAP
• CORD CLIP
• HANG LOOP
To Next Page
Loading...
Need help?
General
