The bit rate changes according to the
image complexity. The encoding
efficiency is high and the definition of
motion images can be ensured.
Step 3 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If the message "Apply failed!" is displayed, you must apply for the Parameter
Configure permission from an administrator. For details, see4.10.1
4.4.2 Setting SVC Stream Parameters
Procedure
Step 1 Click Configuration > Stream > SVC Stream.
The SVC Stream page is displayed, as shown in Figure 4-9.
Figure 4-9 SVC Stream Configuration page
Step 2 Set the parameters according to Table 4-4.
Table 4-4 Stream configuration parameters
To Next Page
Loading...
Need help?
General
