The message "Apply success!" is displayed, and the system saves the settings.
----End
4.8.9 Setting SNMP Parameters
Description
Simple Network Management Protocol (SNMP) is an Internet Standard protocol,
supports SNMP v1, SNMPv2c and SNMPv3 network protocol. Choose the proper
SNMP protocol version and set the SNMP protocol parameter to collect and organize
information about managed devices on IP networks.
Procedure
Step 1 Choose Configuration > Network Service > SNMP.
The SNMP page is displayed, as shown in Figure 4-35.
To Next Page
Loading...
Need help?
General
