3. Set the start time and end time as required.
4. Enter the corresponding user name that is registered with the device from the
User Name drop-down list box.
Step 3 Click Query.
The operation logs related to the specified user are displayed.
Step 4 Download the operation logs.
1. Set the start time, end time and log type.
2. Click Download on the right of the page.
The log link and the message "Please download log by ’save as ‘in the right
key" are displayed.
3. Right-click the link and save the logs.
An operation log is named as Operation Log by default and in the following format:
Operation time user(User name) Operation information
For example:
2012-06-20 13:40:39 user() StartUpDevice
2012-06-20 13:42:46 user(admin) ConfigureDeviceName
2012-06-20 13:43:16 user(admin) ConfigureAlarmIn
----End
4.11.3 Querying Alarm Logs
Description
An alarm log records information about an alarm generated on a device, including the
security, disk, and recording alarms.
Procedure
Step 1 Choose Configuration > Device Log > Alarm Log.
The Alarm Log page is displayed, as shown in Figure 4-42.
To Next Page
Loading...
Need help?
General
