To Next PageTo Next Page
Need help?Do you have a question about the WeatherMaster A and is the answer not in the manual?
General| Brand | WeatherMaster |
|---|---|
| Model | A |
| Category | Watch |
| Language | English |
Selects modes and setting items within the watch interface.
Selects Altimeter, Barometer, and Compass modes.
Selects displays, starts/stops chronograph function.
Activates lap/reset, moves cursor, decreases digits.
Turns on the EL backlight for approximately 3 seconds.
Press any button to activate the watch from Power Saving Mode.
Details the 4 functional displays available in Current Time Mode.
Displays the current temperature reading.
Predicts weather using air pressure changes with 4 symbols.
Explains the 4 weather symbols: Sunny, Cloudy, Raining.
Step-by-step guide to set current time and date.
Watch has two daily alarms and an hourly chime feature.
Procedure to activate or deactivate alarms.
Procedure to activate or deactivate hourly chime.
Measures elapsed, cumulative, and lap times.
Instructions to start, stop, and reset chronograph counting.
Describes how to record lap times up to 100 laps.
Describes the countdown timer feature.
User-definable value for timer.
Step-by-step guide to set custom timer values.
Instructions on starting, stopping, and using the timer.
Explains pacer function and its beeping rate.
Guide to set the pacer's BPM.
Function to display time of a second time zone.
Instructions for setting the dual time.
Lists Altimeter's Temperature and History Displays.
Watch records altitude readings hourly for graph.
Lists four adjustment methods: Zero, Absolute, Sea Level, Factory Default.
Steps to calibrate altitude to zero for relative measurements.
Steps to set a known absolute altitude.
Explains updating sea level pressure for accuracy.
Steps to adjust altitude based on sea level pressure.
Steps to restore altitude calibration to factory settings.
Lists Barometer's Temperature, Sea Level Pressure, and History Displays.
Shows the current sea level pressure.
Explains why barometer calibration might be needed.
Lists Absolute Pressure and Factory Default adjustments.
Steps to adjust pressure to an absolute value.
Important advice for accurate compass use.
Lists compass directions (N, NNE, NE, etc.).
Defines bearing as angular difference from North.
Explains distortion indicator and its resolution.
Function for opposite direction bearing.
Feature to lock direction readings.
Using bearing to follow a trail accurately.
Explains the difference between Magnetic and True North.
Where to find declination data on maps and online.
How to adjust bearing using declination.
Illustrates compensation with Westerly and Easterly declination.
Conditions requiring compass calibration.
Overview of calibration processes (Rotation and Declination).
Steps to enter the rotation calibration mode.
Explains setting magnetic declination angle.
How to identify low battery and its implications.
Watch function to conserve battery by turning off LCD.
Instructions to activate and deactivate power saving mode.
