Control panel legend：
①
On-Off button: Press this button to switch the Cool
Top 23 RT-E On or Off；
②
Mode button: Push this button to switch among the
modes Auto, Eco, and Power.
③
Airflow button: Each push on this button
corresponds to cycle through 5 different airflow levels;
④
Auto 26
℃
： Press this button enables automatic
management towards 26
℃
；
⑤
Temperature “+”button: Each pushing on this button
corresponds to the increase of 1
℃
of temperature;
⑥
Temperature “-” button: Each pushing on this button
corresponds to the decrease of 1
℃
of temperature;
⑦
Display window: Display temperature, airflow,
Voltage, error codes and ambient temperature.
⑧
Infrared signal：Acceptance of infrared signal from
remote controller by users.
Low-voltage protection function
Settings: Long press on “26 ℃ ” button till screen
blinking, adjust low-voltage cutoff value (default value
is 20.5V, ranging 18-23V)via Temp“+” or “-” button,
and then long press on “26℃” button again for 5s.
To Next Page
Loading...