21
WEBASTO DBW SERIES HEATERS OPERATING INSTRUCTIONS
Clock Programming (Present Time and Day)
• Depress buttons ‘Set’ and ‘Display’ simultaneously to start programming
NOTE: Time display will begin to flash.
• Depress button ‘Day’ to select day of week.
• Depress button ‘Hour’ to select correct hour.
NOTE: If the dip switch setting is in the AM/PM mode, the red PM LED will respond.
• Depress button ‘Minute’ to select correct minute.
• Depress button ‘Set’ to end timer programming.
NOTE: If ‘Set’ button is not depressed within 15 seconds, programming function
will end automatically.
Heater
on/off
manual
Set
Display
Set
Timer
on/off
Display
Minute
Minute
Hour
Day
AND
To Next Page
Loading...
