GENERAL SAFETY INSTRUCTIONS
It is important that you read and understand the owner’s manual and labels affixed to the
machine. Learn its application and limitations as well as the specific potential hazards. Retain
these instructions for future reference. The operator is responsible for following the warnings
& instructions in this manual and on the product.
Read & understand operator’s manual
before using the machine. Failure to follow
instructions could result in death or serious
injury.
DANGER
Beware of sharp blades & nylon line,
which will continue to move after the
motor is switched off. The blades could
reciprocate, even after the plug has been
removed from the power supply.
Wear gloves to protect your hands
Wear safety shoes.
Check your machine before turning it on.
Keep guards in place & in working order.
Frequently check to see that foreign
objects are removed from the working
area before turning it on. Replace
damaged, missing or failed parts before
Whenever the machine is in use, safety
glasses must be worn to safeguard against
flying objects.
Hearing protection must also be used to
protect the users hearing.
Face masks are also recommended to avoid
Before working or undertaking any
servicing or cleaning of the machine,
ensure the electrical cable is removed
from the power source.
Keep all bystanders & animals at least 15
metres away from the machine during
operation.
If approached, stop the machine
immediately.
Do not expose to rain or damp conditions
Always disconnect your machine from the
electrical supply before
clearing, inspecting or adjusting any part of
it, or if the supply cable has
become damaged or entangled
Safety alert symbol. Used to alert you to
potential personal injury hazards. Obey all
safety messages that follow this symbol to
avoid possible injury.
Indicates an imminently hazardous situation
which, if not avoided, will result in serious
injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
CAUTION
Used without the safety alert symbol,
indicates a potentially hazardous situation
which, if not avoided, may result in
(Image used for illustration purposes only,
check machine and Declaration of
Conformity for actual reading)
According to the European directive
2012/19/EU for Waste Electrical &
Electronic Equipment and its
implementation into national law, electrical
and electronic equipment that are no longer
usable must be collected separately &
disposed of in an environmentally correct
Separate collection of used products and
packaging allow materials to be recycled &
used again. Reuse of recycled materials
helps prevent environmental pollution and
reduces the demand for raw material.
CE marking is a certification mark that
indicates conformity with health, safety, and
environmental protection standards for
products sold within the European Economic
WEELT650 Instruction Manual.indd 5 17/11/2017 10:11
To Next Page
Loading...