OPERATION
STARTING THE MACHINE
Ensure the machine is within the working grassed area.
Plug the machine into the electric supply, ensuring it meets the recommended requirements.
Feed the cable through the cable restraint as imaged
Press the Safety Button (A) and pull the Trigger (B) towards the main handle.
The mower will start and blade immediately rotate.
When operating the machine, you can release the Safety Button and the machine will still operate.
STOP THE MOTOR
To stop the motor, release the Trigger. (WARNING – The blade will still rotate for a small time, after the
trigger has been released).
HANDLE ASSEMBLY
§ Insert the lower handles into the deck of the machine, individually. Press the height
adjustment button to allow the lower handle to be inserted and ensure both handles are fixed
to the same height.
§ Slide the Cable Restraint over the left hand side of the Upper Handle and secure the Upper
Handle to the Lower Handles using the Handle Knob and Bolts provided.
§ Ensure the Electric Cable run down the outside of the handle assembly.
§ Secure the Electric Cable to the handle assembly, using the Cable Clips provided.
GRASSBOX COLLECTOR
§ Ensure the lower mesh collector is fully clear open and away from the collector top.
§ Lift the Grass Flap.
§ Secure The Grassbox to the machine, ensuring the hooks are firmly housed onto the machine
deck.
4
WEER33 Instruction Manual.indd 10 20/10/2016 14:11
To Next Page
Loading...
