ASSEMBLY
ASSEMBLY/PRE-OPERATION
Read these instructions in its entirety before you attempt to assemble and operate your new
lawnmower.
REMOVE LAWN MOWER FROM CARTON
Roll the lawn mower out of the carton and check thoroughly for additional loose parts. Please ensure
that you have all the below necessary parts, before commencing with the assembly. In the unlikely
event that you are missing a component, please do contact us on 01793 333212, option 2 or email
customerservice@handydistribution.co.uk for assistance.
x1 x1
x2
x1 x1 x2 x2 x2
GENERAL MOWING TIPS
§ When cutting long grass, reduce walking speed to allow for more effective cutting and a proper
discharge of the clippings. It is recommended that you cut longer grass in stages. Start at a higher
cutting height and go over the same area a second time with a lower cutting height.
§ Do not cut wet grass; it will stick to the underside of the deck and prevent proper collection or
discharge of grass clippings.
§ New or thick grass may require a higher cutting height.
§ Empty the grass box regularly, the discharge chute will become blocked with grass cuttings.
§ The mower is designed to operate and cut most effectively when moving forwards.
OVERLOAD PROTECTION
§ The product has an overload protection device. When overloading is detected, the product will
automatically switch off. If the overload protector is actuated, the motor must be allowed to cool
down for 5 to 10 minutes.
§ Turn off the power and remove the plug from the supply. The blades are sharp, wear heavy duty
gloves before touching. Make sure the blade can rotate freely and is not jammed or tight.
§ When the motor is cool, connect the plug to the power supply, turn the power on. Press the Safety
Button & then the Trigger to start the product. If the product will still not start, return it to an
authorised service centre for repair.
MAINTENANCE AND STORAGE
§
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
§
Replace worn or damaged parts for safety.
§
Keep the machine free of grass, leaves, or other debris build-up.
§
Allow the machine to cool before storing.
§
Grass catcher components are subject to wear, damage, & deterioration, which could expose
moving parts or allow objects to be thrown. Frequently check & replace them with the
manufacturer’s recommended parts, when necessary.
§
Mower blades are sharp and can be dangerous. Wrap the blade(s) or wear gloves, and use extra
caution when servicing them.
WEER33 Instruction Manual.indd 8 20/10/2016 14:11
To Next Page
Loading...
