EasyManua.ls Logo

Weber mt CR 1 - Device Description

Weber mt CR 1
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 CR 1_CR 2R
Device description
The CR 1/CR2 compactor is used for road building and landscaping compaction tasks.
Drive
The machine is propelled by an air-cooled Robin-Subaru gasoline engine.
Force is transferred to the exciter mechanically via a V-belt.
Operation
The Robin-Subaru gasoline engine is started by means of a manual starting device.
After starting, vibration is switched on via the centrifugal clutch attached to the engine. Use the gas
lever to vary the engine speed between idle and full throttle.
Forward and reverse is variably controlled via the handle attached to the manual guidance rod.

Other manuals for Weber mt CR 1