EasyManua.ls Logo

Weber mt CR 1 - Operating Fluids and Fill Levels; Troubleshooting

Weber mt CR 1
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 CR 1_CR 2R
Operating uids and ll levels
Assembly Operating material Quantity Quantity
Summer Winter CR 1 R CR 2 R
Quality
Engine
Engine oil
SAE 10 W 40
(–10 ~ +50 °C)
API – CD CE-CF-CG
or SHPD
or CCMC – D4 – D5 – PD2
0.6 l 0.6 l
Fuel tank Unleaded gasoline 3.6 l 3.6 l
Vibrator Fully-synthetic transmission uid
API GL-5/GL-4
First lling Fuchs Titan
SINTOPOID LS SAE 75W-90
0.5 l 0.5 l
Water tank 14 l
Transmission Transmission uid DEXRON II-D-ATF
First lling
Fuchs Titan ATF 3000
or equivalent
As
necessary
As
necessary
Troubleshooting
Fault Possible cause Remedy
Soil compactor
does not start
Operating error
Lack of fuel
Fuel lter fouled
Air lter fouled
Execute start process
as prescribed
Check the fuel level
Change the fuel lter
Clean / change air lter
cartridge
No vibration /
no forward motion
or insufcient
forward motion
Vibrator V-belt defective Change vibrator V-belt
Soil compactor
does not switch
Wrong hydraulic
oil level in the manual
guidance rod
Check oil level
Correct oil level

Other manuals for Weber mt CR 1