EasyManua.ls Logo

Weber mt CR 1 - Maintenance Work; Change Engine Oil; Clean;Change Air Filter Cartridge

Weber mt CR 1
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 CR 1_CR 2R
1
1
2
1
1
When working in the area of the engine compartment there
is a danger of being burnt!
Screw the oil drain screw back in and ll the engine with oil as
specied.
Unscrew dip stick (1).
Remove the oil drain screw (2) and drain oil completely.
Clean / change air lter cartridge
Unscrew the air lter cover (1).
Remove the air lter insert (1) from the air lter enclosure.
Clean the air lter insert in accordance with the guidelines
provided by the engine manufacturer, replace in the case
of damage or extreme fouling.
Maintenance work
Change the engine oil
Remove the water tank (1).
Only drain engine oil when at operating temperature.
Danger of scalding due to hot oil.
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.

Other manuals for Weber mt CR 1