Weber 5000 Series - Page 10

10
Two wheel hubcaps
(actual size)
Two hinge pins
(hardware size: 1/4 x 1 1/2 inch clevis pin)
(actual size)
Five 1/4-20 x 2 inch bolts
(actual size)
1/4-20 x 1 1/2 inch bolt
(actual size)
Six 1/4-20 x 1/2 inch bolts
(actual size)
Two 1/4-20 wing nuts
(actual size)
1/4-20 keps nut
1/4-20 hex nut
(actual size)
Two hair pin cotters
Two swing table end brackets
Side burner assembly
Burner grate
Side burner knob
Two side burner locks
Check contents of hardware packs
Four 10-24 x 1 3/4 inch machine screws
(actual size)
Twenty three 1/4 inch nylon washers
(actual size)
Four 10-24 hex nuts
(actual size)
Three burner control knobs
FlameCheck button
Three tool holders
Four tubing plugs
(two are spares)