EasyManua.ls Logo

Weber GENESIS II EP-335 GBS User Manual

Weber GENESIS II EP-335 GBS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EP335 GBS • SP335 GBS • EP435 GBS • SP435 GBS
Keep this Owners Manual for future reference, thoroughly read through it, and
if you have any questions please contact us today.
LP Owners Manual
REGISTER today
54675
100118
en - English
Unlock grilling happiness: Register your GENESIS II gas grill and receive special content
to make you the ultimate backyard hero.
Registration is easy and we only ask a few quick questions. In less than two minutes,
activate your unique WEBER-ID, and unlock a lifetime of WEBER knowledge and guidance.
Stay inspired along the way.
PHONE MOBILE EMAIL ONLINE
Question and Answer IconNeed help?

Do you have a question about the Weber GENESIS II EP-335 GBS and is the answer not in the manual?

Weber GENESIS II EP-335 GBS Specifications

General IconGeneral
Main Burners3
Total Cooking Area669 sq in
BTU-per-hour Input39, 000
Side BurnerYes
Sear StationYes
Dimensions - Lid Open62"H x 59"W x 31"D
Dimensions - Lid Closed47"H x 59"W x 29"D
Cooking Grate MaterialPorcelain-enameled cast iron
GBS GrateYes
Side Tables2
Fuel TypeLiquid Propane
IgnitionElectronic Ignition System
Warranty10 years (excluding normal wear and tear and subject to additional terms and conditions in the warranty)

Summary

GENESIS II FEATURES

GS4 HIGH PERFORMANCE GRILLING SYSTEM

Barbecuing Do's and Don'ts

Getting Started

Important Information about LP Gas & Gas Connections

Explains what LPG is and provides safe handling tips for cylinders.

GENESIS II Burner Valve Orifice Sizes & Consumption Data

Provides technical data on burner orifices and gas consumption by country.

LPG Cylinder Installation & Leak Checking

Connect the Regulator to the Cylinder

Step-by-step instructions for connecting the regulator to the gas cylinder.

Placement of the LPG Cylinder

Guidance on how to position the LPG cylinder on the grill or ground.

What is a Leak Check?

Checking for Gas Leaks

Instructions on how to perform a leak check using soap and water.

Checking for Gas Leaks

If bubbles appear there is a leak:

Explains how to interpret results and what to do if a leak is detected.

If bubbles do not appear, leak checking is complete:

Confirms completion of the leak check and next steps.

Operation

Igniting the Grill

Using the Electronic Ignition System to Ignite the Grill

Step-by-step guide to lighting the grill using the electronic ignition.

Using the Sear Station

Igniting the Side Burner

Using the Electronic Ignition to Ignite the Side Burner

Steps for igniting the side burner using electronic ignition.

Product Care

Troubleshooting

MAIN BURNER(S) or SIDE BURNER WILL NOT IGNITE

Addresses issues where burners fail to ignite using electronic ignition.

Lighting Your Grill with a Match

Provides instructions for lighting the grill using a match as a diagnostic step.

Using a Match to Determine if there is Gas Flow to the Main Burners

Steps to check gas flow by lighting main burners with a match.

Using a Match to Determine if there is Gas Flow to the Side Burner

Steps to check gas flow for the side burner using a match.

GAS FLOW

Barbecue does not reach desired temperature or heats unevenly.

Explains causes and solutions for uneven or low heating.

One or more of the burners fail to ignite.

Covers reasons for burner ignition failure.

Flame is low when burner is on high position.

Addresses issues with low burner flame on high setting.

Flames do not run the whole length of the burner.

Explains flame pattern issues along the burner length.

Burner flame pattern is erratic.

Discusses causes of inconsistent burner flame patterns.

Gas is smelled in conjunction with burner flames that appear yellow and lazy.

Addresses the smell of gas and poor flame quality due to obstructions.

The smell of gas and/or a light hissing sound.

Deals with gas smells or hissing sounds indicating potential leaks.

GREASY BARBECUE (Peeling Paint & Flare-Ups)

Checking the Components of the Electronic Ignition System

Checking the Battery

Steps to check the battery for the ignition module.

Checking the Wires

Guidance on checking ignition wires and connections.

Checking the Earthed Wire

Instructions to verify the earthed wire connection.

Replacement Parts

GENESIS II EP-335 GBS SP-335 GBS

Exploded diagram and part list for specific models.

GENESIS II EP-435 GBS SP-435 GBS

Exploded diagram and part list for specific models.

Related product manuals