Weber Master-Touch Premium E-5775 User Manual

ASSEMBLING THE LID OF
THE
MASTER-TOUCH
GBS PREMIUM E-5770/75
You should now have the bowl and lid fully assembled (apart
from the hinge)
Build the grill like any Master-Touch GBS
(NOTE: if you close the bowl vents, you won‘t lose the screws).
BEFORE YOU START
These are the parts you should have for the
hinge assembly: The assembled hinge with black
knob, 2 metal plates, 2 screws and
6 nuts.
These are the tools, that are already included for
an easy assembly of the lid. Alternatively you
can use a size 11 flex wrench.
1 3
Unscrew the top part of the hinge (the part with
the grip point) that goes on the lid, from the
lower part (the part with the springs) that goes
on the bowl.
2
ASSEMBLING THE LID

Weber Master-Touch Premium E-5775 Specifications

General

Brand	Weber
Model	Master-Touch Premium E-5775
Category	Grill
Language	English

Summary

Assemble the Master-Touch Grill Lid

Identify Hinge Assembly Parts

Gather hinge components: assembled hinge, plates, screws, and nuts for lid assembly.

Separate Hinge Components for Bowl and Lid

Unscrew the top part of the hinge from the lower part to separate lid and bowl components.

Prepare Required Tools for Assembly

Identify included tools or use a size 11 flex wrench for lid assembly.

Attach Lid Hinge Parts

Take the lid and the hinge parts for the lid, ready for attachment.

Install Lid Plate Backing

Insert lid plate backing inside the lid and secure with screws from outside.

Position Lid for Sliding

Lid is ready to be slid onto the hinge part attached to the grill bowl.

Prepare Bowl Hinge Parts

Take the bowl and the hinge parts that will attach to the bowl.

Mount Bowl Hinge to Bowl

Insert bowl plate backing, slide bottom hinge onto screws, and loosely tighten.

Adjust Hinge Slits for Alignment

Observe loose bolts allowing hinge movement along slits for adjustment.

Slide Lid onto Bowl Hinge

Slide the lid onto the hinge and leave the lid in an open position.

Secure Lid Knob

Fully tighten the knob while the lid is still in the open position.

Ensure Lid is Flat and Adjust Hinge

Verify lid flatness and adjust lower hinge if necessary before final tightening.

Troubleshoot Lid Opening Balance

Adjust hinge position (lift back or push down) if lid does not stay open correctly.

Finalize Lid Attachment

Push down the lid to ensure fit, then fully tighten all hinge bolts.