3
Before Getting Started
Before you install your Drive 3G-M Booster
and start enjoying improved cellular
reception please do the following:
1 . Read through all the installation
steps. This will help you know what to
expect from start to finish.
2. Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces are
referenced in the instructions.
Quick Install
You can install your Drive 3G-M Signal
Booster in your vehicle using the following
steps. NOTE: Before completing your
installation, create a “soft” installation by
putting the components of your Drive 3G-M
Signal Booster in place and testing the
operation before mounting equipment.
1 . Install the Outside Antenna. Select a
location on top of the car that is:
• Near the center of the vehicle’s roof.
• At least 12 inches from any other
antennas.
• Free of obstructions.
• At least 6 inches from any windows
(including sunroofs).
• At least 8 inches from any people.
Kit Configuration
weBoost manufactures a wide variety of antennas to help you customize your Signal Booster for your specific application .
Package Contents
Power Supply
6V / 2A
(859913)
12” Mag Mount
w/12.5’ RG174
(311125)
Slim Low Profile
w/10’ RG174
(311152)
Drive 3G-M
TM
Signal Booster
Refer to page 6 for additional Antenna Kit Options
Marine
Antenna
(311130-5810)
Mini-Mag
Antenna
(301126)
Trucker
Antenna
(311133)
NMO Antenna
(314203-5810)
Optional Antenna Kits
To Next Page
Loading...
Need help?
General