9
WeCo Srl Italy www.wecobatteries.com 4K4LT V1.00 24/01/2023
3 SECURITY
3.1 Warnings and notifications
Installation Environment Requirements: 4K4LT is designed for indoor and domestic applications (IP 20) and therefore must be installed in an
IP20-compliant location. Installations in places that do not comply with the IP20 degree of protection may cause failure and / or damage to the
product and subsequently the product warranty will be considered void.
3.2 Safety Guidelines
Always make sure to avoid a short circuit between the positive terminal and a negative battery terminal.
All electrical connections of the 4K4LT must be made only by qualified professional personnel.
When installed and used in accordance with this manual, the 4K4LT series battery will operate safely and reliably in accordance with the
battery operation specifications.
Subjecting the battery to an unsuitable operating environment, operating it as a result of failure, damage, abnormality, misuse or abuse may
result in health and safety risks, such as overheating or potential electrolyte smoke caused by use out of operating range permitted by WeCo.
All personnel and /or users must observe safety precautions and observe all warnings as detailed in this document. If any of the safety
precautions or procedures described in this manual are not fully understood by the reader, the reader, if it is not a qualified installer, should
not perform any operation on the battery until the problem is identified. The correct operation in case of anomaly is always the shutdown and
isolation of the battery of the rest of the system. To clarify and confirm your understanding of the correct procedure, please contact WeCo.
The safety guidelines included in this document may not include or consider all regulations in your installation/operation area. During
installation and operation of this product, the installer should review and consider applicable local laws and regulations in accordance with the
product's industry standards.
Installation personnel should not wear watches and other metal objects when performing installations as a precaution to avoid short circuits
and personal injury.
The weight of a single 4K4LT battery is 47 kg, please use the original packaging and take all safety precautions if the battery needs to be
repositioned in another position, to avoid product damage and personal injury.
Use mechanical lifts for loading and unloading and positioning of the same.
To Next Page
Loading...