Weego 22 - Engine Compatibility

UNDERSTANDING YOUR Smarty Clamps®
Your Smarty Clamps• have a "smart" box that will help guide you through a
jump with both sight and sound. It will let you know when it is safe to jump
or if there is an error.
e READY
Solid green light, no Sound
Smarty Clamps• detect that you have a good connection
and you are ready to jump.
M REVERSE+/· Rashlng Green & Red Lights+ Beeping
You attached the Smarty Clampse on the wrong terminals.
Make sure the BLACK clamp is attached to the battery's
NEGAllVE (·)terminal, and the RED clamp is attached to the
battery's POSITlVE (+) terminal. If not attached properly,
Weego 22 will not let you jump your engine.
~ COOL DOWN Rashlng Red Light+ Beeping
~ WAITFOR e
This happens when )UUr Weego is cranked longer than the
recommended 3 seconds, or if your engine is trying to pull more
power than the Weego 22 is willing to provide. Detach the
Smarty Clampse from the battery and give the unit up to 3
minutes to cool down. Then, repeat steps 2-5 under Jump
Starting Your Engine.
e SEE REVERSE Solid Red Ught, No Sound
This means the vehicle's battery is too weak to even start, OR
the system voltage of your vehicle is not compatible with your
Weego 22 (for 12¥ vehicles ONLY).
e SEE REVERSE Solid Red Ught + Beeping
There may be an engine size issue. If the engine )Uu're
connecting to is larger than what we recommend, it will try to pull
more pa.ver than your Weetp 22 is able to give. If, this happens
Weego 22 will prevent )Uu from jumping your engine. Please see
Engine Compatibility in your owner's manual to determine if )UUr
engine size falls within the scope ofWeetp 22.