To Next PageTo Next Page
Need help?Do you have a question about the WEG CFW500 Series and is the answer not in the manual?
General| Input Voltage | 200-240 V, 380-480 V |
|---|---|
| Protection Degree | IP20 |
| Operating Temperature | -10°C to 50°C |
| Output Voltage | 0 to input voltage |
| Communication Protocols | Modbus RTU, CANopen, PROFIBUS DP, Ethernet/IP, PROFINET |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Motor overload |
| Braking | DC braking, Dynamic braking |
| Humidity | 5% to 90%, non-condensing |
| Control Type | V/F scalar control, Sensorless vector control (VWF), Closed-loop vector control (with encoder feedback) |
Provides critical safety warnings and preliminary recommendations for using the CFW500-CRS485 Plug-in Module safely.
Emphasizes disconnecting power and waiting for de-energization before connecting accessories to the CFW500 inverter.
Details the purpose of the guide: installation, configuration, and operation of the CFW500-CRS485 Plug-in Module.
Lists items to check upon receiving the product: accessory in anti-static packaging and the operation guide.
Step-by-step guide for installing the RS485 plug-in module, including cover removal and parameter verification.
Pin assignments and descriptions for the superior terminal connector of the RS485 plug-in module.
Pin assignments and descriptions for the inferior terminal connector of the RS485 plug-in module.
Configuration of analog inputs/outputs using DIP switches and associated parameters.
DIP switch settings (S1.3, S1.4) for activating and terminating RS485 communication.
DIP switch settings (S2.3, S2.4) for activating and terminating secondary RS485 communication.
Connector for Flash Memory Module (CFW500-MMF) for data transfer between inverters.
Illustrations of removing the front cover and connecting the RS485 plug-in accessory.
Diagram showing CRS485 dimensions, DIP-switch locations, and MCard connector.
