English
33
espresso coffee machine - user instructions
X
ON
AC
BD
E
8.4 LOADING DEFAULT DATA
Proceed as follows to restore the factory settings:
• Move the programming lever (X) located under the machine’s boiler cover to ON;
• turn on the machine and hold down the keys (A) (C) and (E) for at least 5 seconds;
• when programming is complete, return the programming lever (X) to the OFF position.
8.2 PROGRAMMING THE AUTOSTEAMER TEMPERATURE FOR HOT MILK
• Move the programming lever (X) located under the machine’s boiler cover to ON;
• turn on the machine, holding down the (B) button for at least 3 seconds;
• the flashing of the leds on keys (A) and (B) indicates the set temperature, in particular:
- the (A) button indicates tens;
- the (B) button indicates units;
• to increase or decrease the temperature by 1°C at a time, using the (A) + and (B) - keys;
• to confirm the new set temperature, press the STOP/PROG key (E) for at least 3 seconds.
8.3 PROGRAMMING THE AUTOSTEAMER TEMPERATURE FOR FOAMY HOT MILK
• Turn on the machine, holding down the (A) button for at least 3 seconds;
• proceed as indicated in paragraph 8.2 .
All programming operations must be made by qualifi ed technical personnel.
Take care when accessing the inside of the machine to set the programming lever: some of the
components are scalding hot and there are parts under electrical tension.
To Next Page
Loading...
