Wega SPHERA Series User Manual

10 of 68
TECHNICIANS manual
2.6 Data and CE marking
The technical data of the machine is shown in the
following table:
TECHNICAL DATA TABLE JUN 1GR COMPACT 2GR 3GR 4GR
Voltage
120/230
400 V
120/230
240/400 V
120/230
240/400 V
120/230
240/400 V
120/230
240/400 V
230/240
400 V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Max power 2.3 kW 2.3/3.0 kW 3.0 kW 3.7/3.9 kW 5.3 kW 6.3 kW
Boiler 3.5 l 5 l 7 l 12 l 17 l 22 l
Safety valve calibration
(bar)
1.9 bar
Boiler operating
pressure
0.8 - 1.4 bar
Feedwater pressure 1,5 - 5 bar MAX
Coee dispensing
pressure
8 - 9 bar
Operation mode
temperature
5 - 40°C 95° MAX R.U.
Sound pressure level < 70 dB
According to the Directive 2006/42/EC, the machine is
marked with the CE marking, by which the manufacturer
declares, under its own responsibility, that the machine
is safe for people and things.
The CE nameplate is axed to the base of the frame
under the drain pan on which the identication data is
reported. Below is an example of the nameplate:
Via C. Bardini
,
1 SUSEGANA
(
TV
)
- ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
MADE IN ITALY
W
S/N:
Mod.
Hz
Y
V
WEGA MACCHINE PER CAFFÈ S.r.l.
MARCHIO COMMERCIALE
For any communication with the Manufacturer,
always note the following information:
t S/N - machine serial number;
t Mod. - machine model;
t Y - year of manufacture.
The data of the appliance can be seen also on the
label located on the package of the machine.
It is forbidden to remove or damage the nameplate. If it needs
replacing urgently, always exclusively contact the Manufacturer.
The CE nameplate is xed on
the base of the frame under
the drain pan.

Wega SPHERA Series Specifications

General

Brand	Wega
Model	SPHERA Series
Category	Coffee Maker
Language	English