Weidemann Hoftrac 1190e - Page 74

5 Putting into operation
74
Operator’s Manual | 1190e | 1000441528 | 08/2022 | [en]
5.2.1.2 Seat MSG83
3a
1
4 23
Fig.45: Seat adjustment
options MSG83
Sit on the seat to adjust.
Adjusting the backrest
1. Pull lever 1upward and hold.
2. Move the backrest forwards or backwards until the
backrest is at the desired angle.
3. Release lever1.
After adjustment, lever 1 must engage in the desired posi-
tion. Once it is locked in place the backrest must no longer
move.
Height adjustment
The height of the seat can be adjusted in four steps with
the rotary handle 2. The position indicated at the bottom of
the rotary handle 2 is set.
1. Turn rotary handle 2 in position - Low seat height
2. Turn rotary handle 2 in position - Middle seat
height low
3. Turn rotary handle 2 in position - Middle seat
height high
4. Turn rotary handle 2 in position - Highest seat
height
If the height of the seat has been adjusted, the suspension
must also be readjusted.