5
Putting into operation 5
75
[en] | 08/2022 | 1000441528 | 1190e | Operator’s Manual
Adjusting the suspension
▪ Turn lever 3 clockwise.
ð Spring tension is reduced - suspension becomes
softer.
▪ Turn lever 3 counterclockwise.
ð Spring tension is increased- suspension becomes
harder.
The suspension is correctly adjusted when the position in-
dicated at the bottom of the rotary handle 2 is visible in the
oil sight glass 3a.
Adjusting longitudinal direction
1. Pull lever 4upward and hold.
2. Push the seat forwards or backwards into the desired
position.
3. Release lever4.
After adjustment, lever 4 must engage in the desired posi-
tion. It shall not be possible to move the seat after it has
been locked.
To Next Page
