Weidemann Hoftrac 1190e - Page 76

5 Putting into operation
76
Operator’s Manual | 1190e | 1000441528 | 08/2022 | [en]
5.2.1.3 Seat MSG93
1
2
3
Fig.46: Seat adjustment
options MSG93
Sit on the seat to adjust.
Adjusting the backrest
1. Pull lever 1 upward and hold.
2. Move the backrest forwards or backwards until the
backrest is at the desired angle.
3. Release lever1.
After adjustment, lever 1 must engage in the desired posi-
tion. Once it is locked in place the backrest must no longer
move.
Adjusting longitudinal direction
1. Pull lever 2 upward and hold.
2. Push the seat forwards or backwards into the desired
position.
3. Release lever2.
After adjustment, lever 2 must engage in the desired posi-
tion. It shall not be possible to move the seat after it has
been locked.
Adjusting suspension and height
The seat MSG93 is air suspended. The suspension and
height of the seat can be continuously adjusted with lever 3
via a compressor. The reaching of the lower and upper end
stops of the suspension is indicated when the sound of the
compressor changes audibly.