Weider 155 Bench User Manual

7
6. Grease the M10 x 55mm Bolt (35). Attach the Leg
Lever (7) to the Front Leg (1) with the Bolt and an
M
10 Nylon Locknut (15). D
o not overtighten the
Locknut; the Leg Lever must be able to pivot
e
asily.
8. Grease the M10 x 160mm Bolt (27). Attach the
Backrest Frames (6) to the Bench Frame (2) with
the Bolt, two M10 Washers (11), and an M10
Nylon Locknut (15). Do not overtighten the
Locknut; the Backrest Frames must be able to
pivot easily.
Tighten the M6 x 38mm Screws (39) used in
step 7.
9. Attach the other Seat (25) to the Bench Frame (2)
with two M6 x 16mm Screws (36).
7. Attach the Large Backrest (12) to the Backrest
Frames (6) with four M6 x 38mm Screws (39) and
four M6 Washers (32).
Do not tighten the
Screws yet.
Attach a Small Backrest (13) to the Backrest
Frames (6) with two M6 x 38mm Screws (39) and
two M6 Washers (32). Do not tighten the
Screws yet.
35
1
5
7
1
Grease
6
7
12
13
6
32
39
32
39
32
39
15
8
9
25
2
36
6
11
11
2
27
Grease

Weider 155 Bench Specifications

General

Brand	Weider
Model	155 Bench
Category	Home Gym
Language	English