10
10. Attach the Left Barbell Hook (33) to the left
Upright (1) with an M8 Zinc Washer (35) and an
M8 Zinc Locknut (36). Do not overtighten the
Z
inc Locknut; the Barbell Hook must pivot
freely.
Attach the Right Barbell Hook (32) to the
right Upright (1) in the same way.
11. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTMENT, starting on page 11.
36
35
36
3
5
3
3
32
1
1
10
To Next Page
Loading...
