Need help?Do you have a question about the Weider 8775hard Drive Sys and is the answer not in the manual?
Contact information for customer service and important safety alerts.
Details on assembled dimensions and identification of machine parts.
Instructions for assembling the base, stabilizer, and center upright.
Steps for installing weight tubes and the rear upright structure.
Guidance on placing weight stacks and attaching the front upright.
Connecting various uprights and the stop cable system.
Instructions for assembling the arm frames and related components.
Attaching arm shocks, handles, and foam pads to the arms.
Steps for assembling pivot arms, backrest, and seat frame.
Connecting the leg lever and seat frame to the main structure.
Assembling the ab seat and the military press/squat arm.
Connecting linkage components and shock absorber mechanisms.
Connecting the ab arm and link arm assemblies.
Installing the VKR frame and associated handles.
Attaching final parts like backrest, seat post, and grips.
Ensuring proper tightening, cable routing, and testing before use.
How to adjust the weight stack resistance for exercises.
Switching the arms between butterfly and press modes.
Adjusting the backrest to different positions.
Procedures for attaching/removing the seat and leg lever.
Connecting lat bar or strap to the high pulley system.
Connecting lat bar or strap to the low pulley system.
Instructions for tightening slack cables and maintaining cable tension.
To Next Page
General
